Preparation and evaluation of Indigo Naturalis dry suspension based on powder surface modification / 药学学报

A dry suspension of Indigo Naturalis (IN) based on lactose-IN composite particles was designed by powder modification technology to meet the clinical needs of IN. The contact angle was used as an evaluation index to investigate the effects of the type of modifier lactose, the amount of lactose, and the co-grinding time of lactose and IN on the hydrophilicity of IN. The difference between IN before and after modification was compared through physical properties such as particle size and scanning electron microscope, as well as hydrophilic properties such as surface free energy and multiple light scattering. The optimal process of lactose-IN composite particles is as follows: after lactose is ground alone for 2 minutes, it is co-ground with IN at a ratio of 1∶1 for 6 minutes. The results of the investigation of powder properties show that the particle size d0.9 of IN is reduced from 112.75 μm to 87.30 μm after modification. The BET and Langmuir specific surface areas decreased by 8.661 m2·g-1 and 12.512 m2·g-1, respectively. SEM shows that lactose is attached to the surface of modified IN (MIN); surface element analysis shows that Si, Ca, and Mg elements of MIN are smaller than IN, and O elements are larger. The infrared spectrum shows that the MIN possesses the characteristic peaks of both IN and lactose. Compared MIN with IN, the contact angle and the non-polar surface free energy decreased by 35.1° and 9.975 mJ·m-2, respectively; the polar surface free energy and the surface free energy increased by 36.956 and 26.950 mJ·m-2, respectively. The results of multiple light scattering showed that the light transmittance of MIN was 35% lower than that of IN, and the backscattered light intensity was increased by about 25%. Only one excipient was used to successfully prepare IN dry suspension with good wettability and suspending property, which provided a basis for the development of new preparations of IN.

Application and problems analysis of traditional Chinese medicine volatile oil preparation technology based on ionic liquids / 中国中药杂志

Ionic liquids(ILs) are salts composed entirely of anions and cations in a liquid state at or near room temperature, which have a variety of good physicochemical properties such as low volatility and high stability. This paper mainly reviewed the research overview of ILs in the application of traditional Chinese medicine(TCM) volatile oil preparation technology. Firstly, it briefly introduced the application of TCM volatile oil preparation technology and composition classification and physicochemical properties of ILs, and then summarized the application of ILs in the extraction, separation, analysis, and preparation of TCM volatile oil. Finally, the problems and challenges of ILs in the application of TCM volatile oil were explained, and the application of ILs in TCM volatile oil in the future was prospected.

Current research status and application prospect of numerical simulation in traditional Chinese medicine drying / 中国中药杂志

With the rapid development of computer technology, numerical simulation has gradually become an important method to study drying process and improve drying equipment. Using computer to simulate the drying process of traditional Chinese medicine(TCM) is characterized by intuitiveness, scientificity, and low cost, which serves as an auxiliary means for technical innovation in TCM drying. This paper summarizes the theories of different drying methods and the research status of numerical simulation in drying, introduces the modeling methods and software of numerical simulation, and expounds the significance of numerical simulation modeling in shortening the research and development cycle, improving drying equipment, and optimizing drying parameters. However, the current numerical simulation method for drying process has problems, such as low accuracy, lack of quantitative indicators for the control of simulation results on the process, and insufficient in-depth research on the mechanism of drug quality changes. Furthermore, this paper put forward the application prospect of numerical simulation in TCM drying, providing reference for the further study of numerical simulation in this field.

Conversion of traditional Chinese medicine (TCM) into nanomedicine:application of theory of unification of medicines and excipients / 中国中药杂志

In recent years, the use of active substances as excipients or as substitutes for other excipients in the design of modern drug delivery systems has received widespread attention, which has promoted the development of the theory of unification of medicines and excipients in the design of traditional Chinese medicine(TCM) preparations. Adopting the theory of unification of medicines and excipients to design drug delivery systems can reduce the use of excipients and thus the cost of preparations, reduce drug toxicity, increase drug solubility and biocompatibility, enhance synergistic effect, and realize targeted delivery and simultaneous delivery of multiple components. However, the research on the application of this theory in the modern drug delivery system of TCM preparations is still insufficient, with few relevant articles. In addition, the TCM active substances that can be used as the excipients remain to be catalogued. In this paper, we review the types and applications of the drug delivery systems with TCM active substances as excipients and describe their common construction methods and mechanisms, aiming to provide references for the in-depth research on the modern drug delivery systems for TCM preparations.

Stability improvement of Chinese medicinal essential oils based on delivery systems and their application in medical field / 中国中药杂志

Essential oils from Chinese medicine are popular in the fields such as medicine, food, and cosmetics because of their unique biological characteristics. However, since essential oils are lipophilic compounds with high volatility, poor stability, and strong irritation, various preparation technologies need to be employed to improve stability, reduce irritation, and increase bioavailability. At present, a variety of preparation technologies have been applied to the encapsulation of essential oils. Various encapsulation strategies are formed because of different delivery systems featured with multiple principles and characteristics and are widely used to improve the stability of essential oils. Essential oils of Chinese medicine are widely used in the medical field, and they are under continuous innovation and development in clinical research, the pharmaceutical industry, medical products, etc. The present study summarized various delivery systems that could improve the stability of essential oils and reviewed the applications of essential oils encapsulated in the delivery systems in the medical field to provide re-ferences for the improvement of stability of essential oils and their safety, efficiency, and wide use in the medical field.

Quality control mode based on engineering quality view of Chinese medicine pharmacy / 中国中药杂志

Due to the characteristics of confusing varieties of Chinese medicinal materials, different sources, complex chemical composition, non-standard preparation process, and non-standard pharmaceutical equipment, the quality of Chinese medicinal preparations is difficult to be controlled and evaluated effectively under the current quality control mode and method of Chinese medicinal preparation. The present study proposed an engineering quality view of Chinese medicine pharmacy and a strategy to control the quality of Chinese medicinal preparations based on the current situation. The "overall, dialectical, and dynamic" multi-factor engineering quality view, covering original medicinal materials, preparation technologies, pharmaceutical equipment, and Chinese medicinal preparations, ensures the traceable process, measurable procedures, and feedback quality. The quality control mode of Chinese medicinal preparation with controllable sources, standardized preparation technologies, green pharmaceutical equipment, and intelligent manufacturing is built up.

Drying effect of Chinese medicinal pills based on new spiral vibration drying technology / 中国中药杂志

The present study explored the drying effect of new spiral vibration drying technology on Chinese medicinal pills with Liuwei Dihuang Pills, Zhuanggu Guanjie Pills, and Muxiang Shunqi Pills as model drugs. With the drying uniformity, drying time, energy consumption, pill split, dissolution time, and change of index components as evaluation indicators, the drying effect of spiral vibration drying technology on model drugs was evaluated and compared with traditional drying methods, such as hot air drying and vacuum drying in the oven. The dynamic changes of moisture in Liuwei Dihuang Pills with different drying time were investigated. Compared with the traditional drying methods in the oven(hot air drying and vacuum drying) at 80 ℃, the spiral vibration drying only took 80 min, shortened by 80%, with 10%-13% energy consumed. The results showed that the moisture of Liuwei Dihuang Pills was negatively related to the drying time. By virtue of multi-layer countercurrent drying and super resonant fluidization techniques, the new spiral vibration drying technology can significantly improve the drying quality of Chinese medicinal pills, improve the drying efficiency, and enhance the manufacturing capacity of Chinese medicinal pills. This study is expected to provide references for the innovation and development of new drying technology of Chinese medicinal pills.

Kinetics and variation of volatile components of Atractylodis Macrocephalae Rhizoma during hot-air drying / 中国中药杂志

The present study explored the kinetics and variation of volatile components of Atractylodis Macrocephalae Rhizoma during the hot-air drying process to obtain the optimal process parameters under multiple goals such as drying efficiency and drying quality. The dry basis moisture content and drying rate curves along with the change of drying time of Atractylodis Macrocephalae Rhizoma were investigated at five levels of drying air temperatures(30, 40, 50, 60, and 70 ℃). The relationship between moisture ratio and time in the drying process of Atractylodis Macrocephalae Rhizoma was fitted and verified by Midilli model, Page model, Overhults model, Modified Page model, Logaritmic model, Two terms Exponential model, and Newton model. Meanwhile, the effective diffusion coefficient of moisture(D_(eff)) and activation energy(E_a) in Atractylodis Macrocephalae Rhizoma were calculated under different drying air temperatures. GC-MS was used to determine the volatile components and content changes of the fresh Atractylodis Macrocephalae Rhizoma and dried products at different temperatures. The dry basis moisture content and drying rate of Atractylodis Macrocephalae Rhizoma were closely related to the temperature of the drying medium, and the moisture of the Atractylodis Macrocephalae Rhizoma decreased with the prolonged drying time. As revealed by the drying rate curve, the drying rate increased with the increase in hot air temperature, and the migration of moisture was accelerated. The comparison of the correlation coefficient(R~2), chi-square(χ~2), and root mean standard error(RMSE) of each model indicated that the parameter average of the Midilli model had the highest degree of fit, with R~2=0.999 2, χ~2=8.78×10~(-5), and RMSE=8.20×10~(-3). Besides, the D_(eff) at 30-70 ℃ was in the range of 1.04×10~(-9)-6.28×10~(-9) m~2·s~(-1), and E_a was 37.47 kJ·mol~(-1). The volatile components of fresh Atractylodis Macrocephalae Rhizoma and dried products at different temperatures were determined by GC-MS, and 18, 18, 18, 17, 17, and 18 compounds were identified respectively, which accounted for more than 84.76% of the volatile components. In conclusion, the hot-air drying of Atractylodis Macrocephalae Rhizoma can be model-fitted and verified and the variation law of the moisture and volatile components of Atractylodis Macrocephalae Rhizoma with temperature is obtained. This study is expected to provide new ideas for exploring the drying characteristics and quality of aromatic Chinese medicine.

Herbal Textual Research and Modern Research Progress of Succus Bambusae / 中国实验方剂学杂志

Succus Bambusae， regarded as the holy medicine for the treatment of phlegm by traditional Chinese medicine experts， has the functions of clearing heat and resolving phlegm， resuscitating and relieving convulsions. In clinical practice， it is mainly used to treat phlegm-heat cough， phlegm yellow and shortness of breath， stroke with exuberant phlegm and other syndromes. The research of its processing procedure and quality standard is the key issue to realize the process modernization and quality standardization of this traditional medicine resource. On the basis of literature research， this paper conducted the herbal textual research on Succus Bambusae， sorted out its medicinal history， and compared the advantages and disadvantages of its traditional and modern preparation procedure. Based on the historical records， it is pointed out that there are still many problems in the traditional and modern processing procedure of Succus Bambusae， such as low-yield processing procedure and extensive production technology that cannot meet the requirements of large-scale green manufacturing. At present， there are a lot of literature on the comparative study of the origin， variety and processing procedure of Succus Bambusae， but most of them are limited to the chemical components， and lack of in-depth study on its pharmacodynamic substance basis and mechanism. Meanwhile， the pharmacological effects of Succus Bambusae are mostly limited to antitussive and expectorant， and few other pharmacological effects have been reported. Based on the above analysis， it is suggested that the follow-up research work can be carried out from these five aspects：①Clarifying the original source， enriching and perfecting the medicinal resources. ②Standardizing the processing procedure， establishing relevant quality standards. ③Clarifying the pharmacological mechanism， strengthening the basic research on the pharmacological effect and clinical application. ④Inheriting ancient processing， researching and developing special preparation equipment and standardizing production operation rules. ⑤Comprehensive utilization of the by-products in preparation process.

Online moisture detection technology and its application prospect in drying of traditional Chinese medicine / 中国中药杂志

Drying is one of the most common unit operations in the production of traditional Chinese medicine. The drying process of traditional Chinese medicine materials is accompanied by the dynamic reduction of water content. As a key index to determine the end of the drying process, the moisture content of materials plays an important role in improving drying efficiency and saving energy. Recently, the drying process of traditional Chinese medicine is mostly monitored by offline detection, and there are few reports of online moisture detection applications. In this paper, the principle and current application of online inspection technology for the material drying process in different fields were introduced. The significance of online detection technology in drying of traditional Chinese medicine was also analyzed. Meanwhile, the application prospect of online detection technology in the field of drying of traditional Chinese medicine was predicted. In response to urgent transformation and upgrading of the traditional Chinese medicine manufacturing industry, the application of online moisture detection technology is expected to be a key breakthrough in the intelligent upgrading of traditional Chinese medicine drying technology and equipment.

Critical quality attribute assessment of big brand traditional Chinese medicine: quality control of Tongren Niuhuang Qingxin Pills in texture and sensory attributes / 中国中药杂志

Texture sensory attributes are the key items in quality control of Chinese medicinal honeyed pills. The purpose of this study is to develop a quality control method for assessing the texture sensory attributes of Chinese medicinal honeyed pills based on real-world Tongren Niuhuang Qingxin pilular masses and finished products. First, parameters of texture profile analysis(TPA) were optimized through single factor and central composite design(CCD) experiments to establish a detection method for texture sensory attri-butes of Tongren Niuhuang Qingxin Pills. The results showed that the established detection method was stable and reliable, with the optimal parameters set up as follows: deformation percentage of 70%, detection speed at 30 mm·min~(-1), and interval time of 15 s. Furthermore, 540 data points yielded form six texture sensory attributes of pills from 30 batches were subjected to multivariate statistical process control(MSPC) with Hotelling T~2 and squared prediction error(SPE) control charts to establish the quality control method of Tongren Niuhuang Qingxin Pills. This study is expected to provide a reference for improving the quality control system of Chinese medicinal honeyed pills.

Simulation of Drying Process of Single Liuwei Dihuangwan and Analysis of Its Dynamics Based on Weibull Function / 中国实验方剂学杂志

Objective: Taking single Liuwei Dihuangwan(LDW) as the research object,the moisture content change and volumetric shrinkage characteristics in its drying process were investigated,which provided the theoretical basis for improving the drying efficiency of the pills and reducing the quality problems of the pattern pills,crusts and crack pills. Method: The drying characteristics of LDW at drying temperature of 50,75,100,125℃ were studied by constant temperature hot air drying and vacuum drying.Based on sphere model of Fick's second law and Arrhenius equation,the effective diffusion coefficient and activation energy of the drying process were obtained.The volumetric shrinkage characteristics of the pills during the drying process were studied by the projected area method.The Weibull function was used to fit the drying dynamics curve of single LDW. Result: Hot air drying and vacuum drying of LDW both belonged to the decreasing drying processes,and the time required to achieve the same moisture content in vacuum drying was shorter than that in hot air drying.The moisture ratio in the drying process of single LDW obeyed the Weibull function distribution(R2=0.994 5-0.999 7),the scale parameter(α) decreased with the increase of temperature,and drying temperature had significant influence on the shape parameter (β).The effective diffusion coefficients of hot air drying and vacuum drying were 2.626×10-3-7.823×10-2,3.782×10-3-9.042×10-2 m2·s-1, their activation energy were 47.18,42.69 kJ·mol-1,respectively.The volume ratio of hot air drying and vacuum drying of LDW ranged from 0.638 to 0.741 and 0.607 to 0.689,respectively. Conclusion: Weibull function can be adopted to predict the drying and dehydration law of LDW.Under the condition of low temperature drying,slow-down of shrinkage rate of the pills is helpful to prevent the formation of splitting pills,this study provides theoretical and technical basis for dying of LDW.

Classification of Chinese Medicines Containing Volatile Oil and Analysis of Quality Influencing Factors Based on Fist Part in Chinese Pharmacopoeia 2015 Edition / 中国实验方剂学杂志

Volatile oil is widely distributed in Chinese medicinal materials,which contains rich chemical compositions and has a variety of pharmacological activities such as anti-bacterial,anti-inflammatory,anti-oxidant,anti-tumor,transdermal absorption and antalgic activities,etc.In recent years,the research on the Chinese medicines containing volatile oil is increasing,showing a wide prospect of application in clinical medicine,health care,daily products development,etc.Volatile oil of traditional Chinese medicine has poor solubility,volatility and unstable properties.Factors such as species,harvesting seasons,extraction methods,processing technologies and storage conditions would affect the compositions and contents of volatile oil,thus directly affecting its efficacy,safety and quality stability.Hence,it is especially necessary to control the volatile oil content.The current 2015 edition of the Chinese Pharmacopoeia has made a lot of regulations on the quality control of Chinese medicines containing volatile oil,but generally does not provide the lowest and highest concentrations of volatile oil.As the volatile oil of traditional Chinese medicines has good biological activity and the quality standards are not yet perfect,this study would take the Fist Part of Chinese Pharmacopoeia 2015 Edition as the data source to determine the species of Chinese medicines containing volatile oils through literature research and pharmacopoeia description;the functions,indications,and sources of 196 kinds of traditional Chinese medicines containing volatile oil would be classified and the confusable species would be discriminated by using the Chinese pharmacy knowledge.In this study,the quality-influencing factors would be comprehensively analyzed and the content determination methods of volatile oil would be summarized to offer a reference for the development and application of Chinese medicinal materials containing volatile oil,as well as to lay the foundation for further reinforcing and improving their quality standards.

Discussion on research thought of dry granulation of traditional Chinese medicine: research progress at home and abroad based on dry granulation technology / 中国中药杂志

Dry granulation technology is a great innovation in granulation technology,which saves many intermediate links and reduces many intermediate costs. It is closely related to the characteristics of materials,dry granulation equipment and process. Dry granulation technology is a systematic engineering science covering many technical fields. The process of dry granulation involves complex mathematical model mechanisms of temperature field,pressure field and velocity field,closely related to the characteristics of materials and drying equipment. However,due to the late start of research on dry granulation technology of traditional Chinese medicine,basic research is still weak. The research on dry granulation technology has achieved great results in the fields of food,chemical industry,agriculture and forestry,showing great reference significance. The advantage of dry granulation of traditional Chinese medicine is that it can be directly granulated by adding an appropriate amount of auxiliary materials in the extract powder of traditional Chinese medicine,without the need of wetting,mixing,drying and other processes. The process is simple and can effectively guarantee the quality of traditional Chinese medicine. The granules obtained by the dry granulation technique are important intermediates for preparing the solid preparations of traditional Chinese medicines,which would directly affect the subsequent molding process and the quality of the preparation products. Therefore,based on the characteristics of dry granulation method in traditional Chinese medicine and by referring to the advanced research results of dry granulation technology in other fields,we would discuss the research ideas of dry granulation in traditional Chinese medicine in terms of the mechanism of dry granulation equipment,technology,on-line detection technology and mathematical model of dry granulation process,hoping to provide reference for the research of dry granulation method in traditional Chinese medicine.

Quality process control system of Chinese medicine preparation based on "holistic view" / 中国中药杂志

"High quality, safety and effectiveness" are the primary principles for the pharmaceutical research and development process in China. The quality of products relies not only on the inspection method, but also on the design and development, process control and standardized management. The quality depends on the process control level. In this paper, the history and current development of quality control of traditional Chinese medicine (TCM) preparations are reviewed systematically. Based on the development model of international drug quality control and the misunderstanding of quality control of TCM preparations, the reasons for impacting the homogeneity of TCM preparations are analyzed and summarized. According to TCM characteristics, efforts were made to control the diversity of TCM, make "unstable" TCM into "stable" Chinese patent medicines, put forward the concepts of "holistic view" and "QbD (quality by design)", so as to create the "holistic, modular, data, standardized" model as the core of TCM preparation quality process control model. Scientific studies shall conform to the actual production of TCM preparations, and be conducive to supporting advanced equipment and technology upgrade, thoroughly applying the scientific research achievements in Chinese patent medicines, and promoting the cluster application and transformation application of TCM pharmaceutical technology, so as to improve the quality and effectiveness of the TCM industry and realize the green development.

Current situations and problem analysis of influencing factors of traditional Chinese medicine tablets on forming quality / 中国中药杂志

The compressibility of tablets is the essential operating unit during the preparation of traditional Chinese medicine tablets, as well as a complicated process. Therefore, it is of great significance to comprehensively study the influencing factors on the formation process. This paper aimed to review the evaluation methods for the tablet forming quality and highlight the effects of material powder properties, excipients and preparation technology on the quality of traditional Chinese medicine tablets on the basis of relevant literatures. Furthermore, the common problems in tablet forming process are also analyzed to provide useful references for the development of tablet forming quality of traditional Chinese medicines.

Effect and regulation of drying on quality of traditional Chinese medicine pills / 中国中药杂志

The dry quality of traditional Chinese medicine pills is the hot spot of pills research, because their quality has a crucial effect on the efficacy and development of dosage forms. Through literature research and statistical analysis, we would review the current problems on the drying of traditional Chinese medicine pills in this paper, and surrounding the evaluation system for traditional Chinese medicine pills, analyze the characteristics of common drying equipment and processes as well as their effect on quality of pills, discuss the problems in drying equipment and process as well as quality, and put forward the corresponding strategies, hoping to provide new ideas and new methods for the quality improvement of traditional Chinese medicine pills and quality standards.

Status, problems and warranty strategy of quality uniformity for traditional Chinese medicine preparations / 中国中药杂志

The quality uniformity of traditional Chinese medicine (TCM) preparation is the base for guaranteeing the safety and effectiveness of clinical medication. At present, the quality of TCM preparation is uneven. At present, the same TCM preparation in different manufacturers, TCM preparations in the same manufacturer, and even different batches of a same TCM preparation in the same manufacturer have great differences in quality, which can not reach stability and uniformity. This paper would discuss the possible factors that influence the uniformity of quality in the whole process of pharmacy by means of consulting relevant literature on quality control of Chinese herbal preparations and analyzing the present situation and problems of the quality of TCM preparation. In addition, some strategies such as standardization of cultivation of TCM, processing standardization, standardization of pharmaceutical equipment, mixed batch feeding, and Quality by Design would be also put forward to provide references for the quality uniformity of TCM preparation.

Analysis and countermeasure for quality risk in process of traditional Chinese medicine preparations / 中国中药杂志

Product quality relies on not only testing methods,but also the design and development, production control and product manufacturing all aspects of logistics management. Quality comes from the process control level.Therefore, it is very important to accurately identify the factors that may induce quality risk in the production process and quality control measures correspondingly.This article systematically analyzes the source of the quality risk of all aspects of the production process in traditional Chinese medicine preparation. Discussing ways and methods of quality risk identification of traditional Chinese medicine preparation and providing references for perfecting the whole process quality management of traditional Chinese medicine preparation.

Study on influence factors on relationship between boiling point and saturated steam pressure in vacuum extraction of traditional Chinese medicines / 中草药

Objective: To investigate the correlation of water and different volume fractions of ethanol boiling point and saturated steam pressure when using the vacuum extraction technology, and to compare the impact on saturation steam pressure of the addition of different medicine materials (Andrographis paniculata, Carthamus tinctorius, Angelica dahurica, Uncaria rhynchophylla, Scutellaria baicalensis, Salvia miltiorrhiza, Citrus reticulata) or the addition of materials with different particle sizes. Methods: To obtain the theoretical value and measured value of saturated steam pressure under different boiling points by the combined method of theoretical calculation, experiment measurement, and statistical analysis Results: The regression equation for the saturated steam pressure (P) with the volume fraction of ethanol solvent (V) and the boiling point (T) was P = 76.467 1+0.035 2 T2+1.201 0 TV-30.749 4 V2-3.123 9 T-14.966 7 V. The results showed that measured values of the saturated steam pressure of pure solvent, water and different concentration of ethanol, was less than the theoretical value. After adding herbs, the measured value of saturated steam pressure was higher than the pure solvent. The saturated steam pressure would reduce exactly as the extraction temperature reaches a certain temperature after the herbs were added. Conclusion: The addition and crush of herbs have influence on the saturated vapor pressure of solvent with small range.